Home PrintPrevious Next

10 Advanced fax operations
(Monochrome only)

You can only use one advanced fax operation at a time:
• 
Fax Forwarding
• 
Fax Storage
• 
Fax Preview (MFC-665CW only)
• 
PC Fax Receive
• 
Off
You can change your selection at any time. If received faxes are still in the machine’s memory when you change the advanced fax operations, a question will appear on the LCD. (See Changing Advanced Fax Operations.)

Fax Forwarding

When you choose Fax Forward, your machine stores the received fax in the memory. The machine will then dial the fax number you have programmed and forward the fax message.
1
Press Menu.
2
Press Bsymbol.utri or Bsymbol.dtri to choose Fax.
Press OK.
3
Press Bsymbol.utri or Bsymbol.dtri to choose Advanced Fax Operation.
Press OK.
4
Press Bsymbol.utri or Bsymbol.dtri to choose Forward/Store.
Press OK.
5
Press Bsymbol.utri or Bsymbol.dtri to choose Fax Forward.
Press OK.
6
Enter the forwarding number (up to 20 digits).
Press OK.
7
Press Bsymbol.utri or Bsymbol.dtri to choose Backup Print:On or Backup Print:Off.
Press OK.
Note Note
• 
If you choose Backup Print:On, the machine will also print the fax at your machine so you will have a copy. This is the safety feature in case there is a power failure before the fax is forwarded or a problem at the receiving machine.
• 
(MFC-665CW only)
The machine can store faxes up to 24 hours if there is a power failure.
• 
When Fax Forwarding is turned on your machine will only receive monochrome faxes into memory. Colour faxes will not be received, unless the sending machine converts them to monochrome before sending.
8
Press Stop/Exit.
Page Top
Home PrintPrevious Next