Search

Site Map

Home > Security > Use Secure Function Lock 3.0 > Configure Secure Function Lock 3.0 Using Web Based Management

Configure Secure Function Lock 3.0 Using Web Based Management

  1. Start your web browser.
  2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).

    For example:

    https://192.168.1.2

  3. If required, type the password in the Login field, and then click Login.
    image
    The default password to manage this machine’s settings is located on the back of the machine and marked "Pwd".
  4. Go to the navigation menu, and then click Administrator > Restriction Management or User Restriction Function.
    image
    Start from image, if the navigation menu is not shown on the left side of the screen.
  5. Select Secure Function Lock.
  6. Click Submit.
  7. Click the Restricted Functions menu.
  8. In the User List / Restricted Functions field, type a group name or user name.
  9. In the Print and the other columns, select a checkbox to allow or clear a checkbox to restrict the function listed.
  10. To configure the maximum page count, select the On checkbox in the Page Limits column, and then type the maximum number in the Max. Pages field.
  11. Click Submit.
  12. Click the User List menu.
  13. In the User List field, type the user name.
  14. In the Password field, type a password.
    image
    The number of characters you can set differs depending on the model.
  15. In the E-mail Address field, type the user's email address (available only for certain models).
  16. To register the user's Card ID, type the card number in the Card ID (NFC ID) field (available only for certain models) .
  17. Select User List / Restricted Functions from the drop-down list for each user.
  18. Click Submit.
image
You can also change the user list lockout settings in the Secure Function Lock menu.
Related Information
Did you find the information you needed?

find moreaccept