Search

Home > Security > Use Active Directory Authentication > Configure Active Directory Authentication Using Web Based Management

Configure Active Directory Authentication Using Web Based Management

Related Models:MFC‑J4440DW / MFC‑J4540DW

Active Directory authentication supports Kerberos authentication and NTLMv2 authentication. You must configure the SNTP protocol (network time server) and DNS server configuration for authentication.

  1. Start your web browser.
  2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).

    For example:

    https://192.168.1.2

  3. If required, type the password in the Login field, and then click Login.
    image
    The default password to manage this machine’s settings is located on the back of the machine and marked "Pwd".
  4. Go to the navigation menu, and then click Administrator>User Restriction Function.
    image
    Start from image, if the navigation menu is not shown on the left side of the screen.
  5. Select Active Directory Authentication.
  6. Click Submit.
  7. Select the Active Directory Authentication menu.
  8. Configure the following settings:
    Option
    Description
    Storage Fax RX Data
    Select this option to store incoming fax data. You can print all incoming fax data after you log on to the machine.
    Remember User ID
    Select this option to save your User ID.
    Active Directory Server Address
    Type the IP address or the server name (for example: ad.example.com) of the Active Directory Server.
    Active Directory Domain Name
    Type the Active Directory domain name.
    Protocol & Authentication Method
    Select the protocol and authentication method.
    Get User's Home Directory

    Select this option to obtain your home directory as the Scan to Network destination. (available only for LDAP + kerberos authentication method)

    LDAP Server Port
    Type the port number to connect the Active Directory server via LDAP (available only for LDAP + kerberos authentication method).
    LDAP Search Root
    Type the LDAP search root (available only for LDAP + kerberos authentication method).
  9. Click Submit.
Did you find the information you needed?