Home > Routine Maintenance > Clean Your Brother Machine > Clean the Outside of the Machine
Clean the Outside of the Machine
- IMPORTANT
-
- Cleaning with volatile liquids such as thinner or benzine will damage the outside surface of the machine.
- DO NOT use cleaning materials that contain ammonia.
- DO NOT use isopropyl alcohol to remove dirt from the control panel. It may crack the panel.
- If the paper support flap is open, close it, and then close the paper support.
- Pull the paper trays (1) completely out of the machine as shown by the arrow.
- Tray #1
- Tray #2
- Lift the paper support (1), and then pull it at an angle completely out of the machine as shown by the arrow.
- Wipe the outside of the machine with a dry, lint-free cloth to remove dust.
- Wipe the inside and the outside of the paper tray with a dry, lint-free cloth to remove dust.
- Wipe the outside of the paper support with a dry, lint-free cloth to remove dust.
- Put the paper support firmly back in the machine. Make sure you fit the paper support into the channels.
- Slowly push the paper tray completely into the machine.
Did you find the information you needed?