Home > Scan > Scan Using the Scan Button on Your Machine > Scan Photos and Graphics
Scan Photos and Graphics
![image](../img/GUID-9DF9FA0B-41AF-42D2-8FB9-2D19C8D7B955-low.gif)
Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent changes, use Brother iPrint&Scan.
- Load your document.
- Press .
- If the machine is connected over the network, press
or
to display the computer where you want to send data, and then select the computer name.
If the LCD message prompts you to enter a PIN, use the LCD to enter the four-digit PIN for the computer, and then press [OK].
- To change the settings, press
[Options].
To use
[Options], you must connect a computer with Brother iPrint&Scan installed to the machine.
- Press .
- Select the scan settings you want to change, and then press [OK].OptionDescription2-sided Scan
(MFC-J3940DW/MFC-J6940DW/MFC-J6955DW/MFC-J6957DW)
Select the 2-sided scan mode.
Colour SettingSelect the colour format for your document.
ResolutionSelect the scan resolution for your document.
File TypeSelect the file format for your document.
Document SizeSelect your document size.
BrightnessSelect the brightness level.
ContrastSelect the contrast level.
Auto DeskewCorrect any skewed documents when they are scanned.
Skip Blank PageWhen On is selected, blank pages are skipped.
Remove Background ColourChange the amount of background colour that is removed.
- To save the settings as a shortcut, press [Save as Shortcut]. You will be asked if you want to make this a One Touch Shortcut. Follow the LCD instructions.
- Press [Start].The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to complete the scanning job.