You can choose an enlargement or reduction ratio. If you choose Fit to Page, your machine will adjust the size automatically to the paper size you set.
Press | Fit to Page |
and then  or  to choose Enlarge/Reduce | Custom(25-400%) |
198% 10x15cm A4 |
186%10x15cmLTR |
142% A5A4 |
100% |
97% LTRA4 |
93% A4LTR |
| | 83% LGLA4 |
69% A4A5 |
| | 47% A410x15cm |
To enlarge or reduce the next copy follow the instruction below:
| 1 | Make sure you are in Copy mode  . |
| 2 | Load your document. |
| 3 | Use the dial pad to enter the number of copies (up to 99). |
| 4 | Press Copy Options and or to choose Enlarge/Reduce. Press OK. |
| 5 | Do one of the following: | • | Press or to choose the enlargement or reduction ratio you want. Press OK. | | • | Press or to choose Custom(25-400%). Press OK. Use the dial pad to enter an enlargement or reduction ratio from 25% to 400%. (For example, press 5 3 to enter 53%.) Press OK. |
|
| 6 | Press Mono Start or Colour Start. |
Note
| • | Enlarge/Reduce is not available with Page Layout. |
| • | Fit to Page does not work properly if the document on the scanner glass is skewed by more than 3 degrees. Using the document guide lines on the left and top, place your document in the upper left hand corner, with the document face down on the scanner glass. |
| • | Fit to Page is not available for a Legal size document. |
