Home > Paper Handling > Load Documents > Load Documents in the Automatic Document Feeder (ADF)
Load Documents in the Automatic Document Feeder (ADF)
Use the ADF when copying or scanning multiple-page, standard-sized documents.
- The ADF can hold up to 50 pages and feed each sheet individually.
- Use standard 20 lb (80 g/m2) paper.
- Make sure documents with correction fluid or written in ink are completely dry.
- IMPORTANT
-
- DO NOT leave thick documents on the scanner glass. If you do this, the ADF may jam.
- DO NOT use paper that is curled, wrinkled, folded, ripped, stapled, paper-clipped, pasted, or taped.
- DO NOT use cardboard, newspaper, or fabric.
- To avoid damaging your machine while using the ADF, DO NOT pull on the document while it is feeding.
Document Sizes Supported
Length: | 5.8 in. to 14.0 in. (147.3 mm to 355.6 mm) |
Width: | 4.1 in. to 8.5 in. (105 mm to 215.9 mm) |
Weight: | 16 to 28 lb (60 to 105 g/m2) |
- Unfold the ADF document output support flap.
- Fan the pages well.
- Stagger the pages of your document and load it face up and top edge first, into the ADF as shown in the illustration.
- Adjust the paper guides to fit the width of your document.
Did you find the information you needed?