Maintenance

Impr. PrintQuality

Impr. PrintQuality

Check and correct the print quality, alignment and paper feeding according to the LCD instructions.

Alignment

Correct Paper Feed

Print Head Cleaning

Black only

Clean the print head according to the LCD instructions.

Color only

All

Ink Bottle Model

-

Check the ink bottle model numbers.

Print Options

Reduce Smudging

Reduce smudging on the paper or paper jams during printing.

Enhance Print

Improve print quality and reduce blurriness.

Ink Low Notice

-

Set the machine to display the ink low messages.

Tray Setting

Tray 1

Paper Type

Set the type of paper in the paper tray.

Paper Size

Set the paper size in the paper tray.

MP Tray

Paper Type

Set the type of paper in the paper tray.

Paper Size

Set the paper size in the paper tray.

Copy

Select Tray

Select the tray to be used for copying.

Tray Priority

When Auto is selected in Select Tray, select the order in which the machine uses paper trays that contain paper of the same size.

Fax

Select Tray

Select the tray to be used for faxing.

Tray Priority

When Auto is selected in Select Tray, select the order in which the machine uses paper trays that contain paper of the same size.

Print

Tray Priority

Select the order in which the machine uses paper trays that contain paper of the same size.

Photo Print (JPEG)

Select Tray

Select the tray to be used for photo printing.

Tray Priority

When Auto is selected in Select Tray, select the order in which the machine uses paper trays that contain paper of the same size.

Check Paper

-

Check the paper type and paper size when you pull the tray out of the machine or set the paper in the MP tray.

Quiet Mode

-

-

Decrease printing noise.

Volume

Ring

-

Adjust the ring volume.

Beep

-

Adjust the beeper volume.

Speaker

-

Adjust the speaker volume.

LCD Settings

Backlight

-

Adjust the brightness of the LCD backlight.

Dim Timer

-

Set how long the LCD backlight stays on after returning to the Home screen.

Sleep Time

-

-

Set how long the machine must be idle before it goes into Sleep Mode.

Auto Power Off

-

-

Select how long the machine must wait before it automatically enters Power off mode.

When set to Off, the machine does not power off automatically.

Setup Receive

Ring Delay

-

Set the number of rings before the machine answers in Fax Only or Fax/Tel mode.

Receive Mode

-

Select the Receive Mode that best suits your needs.

F/T Ring Time

-

Set the length of the pseudo/double-ring time in Fax/Tel mode.

Easy Receive

-

Receive fax messages automatically when you answer a call and hear fax tones.

Remote Codes

Remote Codes

Answer calls at an extension or external telephone and use codes to turn on or off the Remote Codes. You can personalize the codes.

Fax Receive Code

Tel Answer

Auto Reduction

-

Reduce the size of incoming faxes.

PC Fax Receive

-

Set the machine to send faxes to your computer.

You can turn on the Backup Print safety feature.

Fax Rx Stamp

-

Print the received time and date on the top of incoming faxes.

Report Setting

Transmission

-

Select the initial setup for the Transmission Verification Report.

Journal Period

Journal Period

Set the interval for automatic printing of the Fax Journal.

If you select an option other than Off and Every 50 Faxes, you can set the time for the option.

If you select Every 7 Days, you can set the day of the week.

Time

Day

Print Fax

-

-

Print incoming faxes stored in the machine's memory.

Remaining Jobs

-

-

Check which scheduled jobs are in the machine's memory and cancel selected jobs.

Miscellaneous

TX Lock

-

Prohibit most functions except receiving faxes.

Distinctive

(USA and Canada only)

Distinctive

Turn on the telephone company's Distinctive Ring subscriber service to register your new ring pattern on the machine.

Ring Pattern

Area Code

(USA only)

-

Set your 3-digit area code only if you do not dial it within your own area code.

Wired LAN

TCP/IP

BOOT Method

Select the Boot method that best suits your needs.

IP Address

Enter the IP address.

Subnet Mask

Enter the Subnet mask.

Gateway

Enter the Gateway address.

Node Name

Enter the Node name.

WINS Configuration

Select the WINS configuration mode.

WINS Server

Specify the IP address of the primary or secondary WINS server.

DNS Server

Specify the IP address of the primary or secondary DNS server.

APIPA

Set the machine to allocate the IP address from the link-local address range automatically.

IPv6

Turn the IPv6 protocol on or off.

Ethernet

-

Select the Ethernet link mode.

Wired Status

-

View the current wired status.

MAC Address

-

View the machine's MAC address.

Set to Default

-

Restore the wired network settings to the factory settings.

Wired Enable

-

Turn the Wired LAN interface on or off manually.

WLAN(Wi-Fi)

Find Wi-Fi Network

-

Configure your wireless network settings manually.

Setup Support

-

Configure your wireless network settings according to the information displayed on the LCD.

WPS/Push Button

-

Configure your wireless network settings using the one-button push method.

WPS/PIN Code

-

Configure your wireless network settings using WPS with a PIN.

Recover WLAN

-

Reset and restart your wireless network.

WLAN Status

Status

View the current wireless network status.

Signal

View the current wireless network signal strength.

SSID

View the current SSID.

Comm. Mode

View the current Communication mode.

TCP/IP

BOOT Method

Select the Boot method that best suits your needs.

IP Address

Enter the IP address.

Subnet Mask

Enter the Subnet mask.

Gateway

Enter the Gateway address.

Node Name

Enter the Node name.

WINS Configuration

Select the WINS configuration mode.

WINS Server

Specify the IP address of the primary or secondary WINS server.

DNS Server

Specify the IP address of the primary or secondary DNS server.

APIPA

Set the machine to allocate the IP address from the link-local address range automatically.

IPv6

Turn the IPv6 protocol on or off.

MAC Address

-

View the machine's MAC address.

Set to Default

-

Restore the wireless network settings to the factory settings.

WLAN Enable

-

Turn the wireless network connection On or Off.

Wi-Fi Direct

Manual

-

Configure your Wi-Fi Direct network settings manually.

Group Owner

-

Set your machine as the Group Owner.

Push Button

-

Configure your Wi-Fi Direct network settings using the one-button push method.

PIN Code

-

Configure your Wi-Fi Direct network settings using WPS with a PIN code.

Device Information

Device Name

View your machine's device name.

SSID

View the Group Owner's SSID.

When the machine is not connected, the LCD displays Not Connected.

IP Address

View your machine's current IP Address.

Status Information

Status

View the current Wi-Fi Direct network status.

Signal

View the current Wi-Fi Direct network signal strength.

When your machine acts as Group Owner, the LCD always indicates a strong signal.

I/F Enable

-

Turn the Wi-Fi Direct connection on or off.

Web Connect Settings

Proxy Settings

Proxy Connection

Change the Web connection settings.

Address

Port

User Name

Password

Web Based Mgmt

-

-

Enable or disable Web Based Management.

If you enable this function, make sure you specify the connection method to use Web Based Management.

IP Filter

-

-

Restrict access to your machine by enabling the IP filter.

Global Detect

Allow Detect

-

Enable or disable Global Detect, a function that detects and notifies the user when the user unintentionally connects to a global network.

Reject Access

-

Disable connections to the global network.

Network Reset

-

-

Restore the machine's network settings back to the factory settings, except the administrator password.

Transmission

Print a Transmission Verification Report for your last transmission.

Address Book

Print a list of names and numbers stored in the Address Book.

Fax Journal

Print a list of information about your last 200 incoming and outgoing faxes.

(TX means Transmit. RX means Receive.)

User Settings

Print a list of your User settings.

Network Config

Print a list of your Network settings.

WLAN Report

Print the wireless LAN connection results.

Caller ID History

Print a list of the available Caller ID information about the last 20 received faxes and telephone calls.

Date & Time

Date

Add the date and time on the screen and in the headings of the faxes you send.

Time

Clock Type

(USA and Canada only)

Select the time format (12-hour or 24-hour).

Auto Daylight

(USA and Canada only)

Set the machine to change automatically for Daylight Saving Time.

Time Zone

Set your time zone.

Station ID

Fax

Enter your name and fax number so it appears on each page you fax.

Name

Tone/Pulse

(Available only for some countries.)

-

Select the dialing mode.

Fax Auto Redial

-

Set the machine to redial the last fax number if the fax did not go through because the line was busy.

Dial Tone

-

Shorten the dial tone detection pause.

Compatibility

-

Adjust the equalization for transmission difficulties.

VoIP service providers offer fax support using various standards. If you regularly experience fax transmission errors, select Basic (for VoIP).

Reset

Machine Reset

Restore all the machine's settings that you have changed, such as Date and Time.

Network

Restore the machine's network settings back to the factory settings, except the administrator password.

Address Book & Fax

Erase all stored phone numbers, fax data, and fax settings.

Stored Fax Data

Erase all stored fax data and settings.

All Settings

Restore all the machine's settings back to the factory settings.

Local Language

(Available only for some countries.)

-

Change your LCD language.