Configure an IPsec Address Template Using Web Based Management
- Start your web browser.
- Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is your machine's IP address).
For example:
https://192.168.1.2
- If required, type the password in the Login field, and then click Login.The default password to manage this machine’s settings is located on the back of the machine and marked "Pwd". Change the default password by following the on-screen instructions when you first log in.
- In the left navigation bar, click .If the left navigation bar is not visible, start navigating from
.
- Click the Delete button to delete an Address Template. When an Address Template is in use, it cannot be deleted.
- Click the Address Template that you want to create. The IPsec Address Template appears.
- Configure the settings.
Option Description Template Name Type a name for the template (up to 16 characters).
Local IP Address IP Address
Specify the IP address. Select ALL IPv4 Address, ALL IPv6 Address, ALL Link Local IPv6, or Custom from the drop-down list.
If you select Custom from the drop-down list, type the IP address (IPv4 or IPv6) in the text box.
IP Address Range
Type the starting and ending IP addresses for the IP address range in the text boxes. If the starting and ending IP addresses are not standardized to IPv4 or IPv6, or the ending IP address is smaller than the starting address, an error will occur.
IP Address / Prefix
Specify the IP address using CIDR notation.
For example: 192.168.1.1/24
Because the prefix is specified in the form of a 24-bit subnet mask (255.255.255.0) for 192.168.1.1, the addresses 192.168.1.### are valid.
Remote IP Address Any
If you select Any, all IP addresses are enabled.
IP Address
Type the specified IP address (IPv4 or IPv6) in the text box.
IP Address Range
Type the first and last IP addresses for the IP address range. If the first and last IP addresses are not standardized to IPv4 or IPv6, or the last IP address is smaller than the first address, an error will occur.
IP Address / Prefix
Specify the IP address using CIDR notation.
For example: 192.168.1.1/24
Because the prefix is specified in the form of a 24-bit subnet mask (255.255.255.0) for 192.168.1.1, the addresses 192.168.1.### are valid.
- Click Submit.
When you change the settings for the template currently in use, restart your machine to activate the configuration.