Home > Introduction to Your Machine > Control Panel Overview
Control Panel Overview
The control panel may vary depending on your model.
- Liquid Crystal Display (LCD)
-
Displays messages to help you set up and use the machine.
- If the machine is in Fax Mode, the LCD displays:
a. Date & Time
b. Receive Mode
- When you press 複印, the LCD displays:
c. Type of copy
d. Number of copies
e. Quality
f. Contrast
g. Copy ratio
- Menu Buttons
-
- 清除
-
Press to delete entered data or cancel the current setting.
- 功能
-
Press to access the Menu to program your machine settings.
- OK
-
Press to store your machine's settings.
or 
-
Press to scroll back or forward through menu selections.
or 
-
- Press to scroll up or down through menus and options.
- Press to change the resolution in Fax Mode.
-
Press
to access speed dial numbers.
- 選項
-
Press to access temporary settings for faxing, scanning, or copying.
- Dial Pad
-
- Use to dial fax and telephone numbers.
- Use as a keyboard to enter text or characters.
- Mode Buttons
-
- 傳真
-
Press to switch the machine to Fax Mode.
- 複印
-
Press to switch the machine to Copy Mode.
- 掃描
-
Press to switch the machine to Scan Mode.
- Function Buttons
-
- 重撥 / 暫停
-
Press to dial the last number you called. This button also inserts a pause when programming quick dial numbers or when dialling a number manually.
- 免持聽筒
-
Press 免持聽筒 before dialing to ensure a fax machine answers, and then press 啟動.
If the machine is in Fax/Tel (F/T) Mode and you pick up the handset of an external telephone during the F/T ring (pseudo double-rings), press 免持聽筒 to talk.
- Wi-Fi (for wireless models)
-
Press and hold the Wi-Fi button and launch the wireless installer on your computer. Follow the on-screen instructions to set up a wireless connection between your machine and your network.
When the Wi-Fi light is on, your machine is connected to a wireless access point. When the Wi-Fi light blinks, the wireless connection is down, or your machine is in the process of connecting to a wireless access point.
- 解析度 (for certain models only)
-
Press to change the Fax resolution.
- 二合一(ID) 影印
-
Press to copy both sides of an identification card onto a single page.
- 雙面
-
Press to copy on both sides of a sheet of paper.
- 捷徑 Button
-
Store and recall up to ten fax and telephone numbers.
To access stored Shortcut fax and telephone numbers, hold down the 捷徑 button and then press the Shortcut number you assigned to the fax or telephone number, using the dial pad.
Power On/Off -
Turn the machine on by pressing
. Turn the machine off by pressing and holding
. The LCD displays [Shutting Down] and stays on for a few seconds before turning off. If you have an external telephone or TAD connected, it is always available.
- 停止 / 退出
-
- Press to stop an operation.
- Press to exit from a menu.
- 啟動
-
- Press to start sending faxes.
- Press to start copying.
- Press to start scanning documents.