Search

Site Map

Home > Paper Handling > Load Paper > Load Paper in the Paper Tray

Load Paper in the Paper Tray

  • When you load a different size and type of paper in the tray, you must also change the Paper Size and Paper Type settings on the machine, or on your computer.
  1. Open the paper tray.
    image
  2. Press and slide the paper guides to fit the paper.
    image
    image

    For A5 size paper, install the A5 paper tray part you unpacked earlier.

    image
  3. Fan the stack of paper well.
  4. Load paper in the paper tray with the printing surface face up.
  5. Make sure the paper is loaded correctly.
    Overfilling the paper tray will cause paper jams.
    image
  6. Press and slide the paper guides to fit the paper.
  7. Open the scanner cover. The pull arm on the left side of the machine will lock. Lift the support flap to prevent paper from sliding off the output tray.
    image
  8. Lift the scanner cover slightly, pull the pull arm on the left side of the machine towards you, and then close the scanner cover using both hands.
    image
Related Information
Did you find the information you needed?

find moreaccept