Home > Scan > Scan Using the Scan Button on Your Machine > Scan Photos and Graphics
Scan Photos and Graphics
![image](../img/GUID-CDF0AA2F-1221-474B-B882-6B55E7709F78-low.gif)
To scan from your machine:
You must select your machine using Brother iPrint&Scan.
Use Brother iPrint&Scan to change scan settings such as file type and file storage location.
For more information, see Related Information: Change the Scan Button Settings from Brother iPrint&Scan.
To scan from your computer:
See Related Information: Scan Using Brother iPrint&Scan (Windows/Mac).
- Press
(Scan).
- Press
or
to select the [to PC] option, and then press OK.
- Press
or
to select the [Image] option, and then press OK.
- If the machine is connected over the network, press
or
to select the destination computer.
- Press OK.
If the LCD prompts you to enter a PIN, enter the four-digit PIN for the destination computer on the LCD and then press OK.
- Do one of the following:
- To change the scan settings for this document, press
or
to select Yes, and then press OK. Go to the next step.
- To use the default scan settings, press
or
to select No, and then press OK. Skip the next step.
To change the scan settings, a computer with Brother iPrint&Scan installed must be connected to the machine.
- Press
or
to select the scan settings you want to change, and then press OK to continue to the next scan setting.
- [Colour Setting]
- [Resolution]
- [File Type]
- [Document Size]
- [Remove Bkg Clr] (available only for certain settings)
- Press Start.The machine starts scanning. Follow the LCD instructions to complete the scanning job.