1.General Setup |
1.Paper Type | 1.MP Tray | Plain(Thick) Thick Thicker Recycled Paper | Sets the type of paper in the MP tray. | |
2.Tray#1 |
Plain(Thick) Recycled Paper | Sets the type of paper in the paper tray. | |
2.Paper Size |
1.MP Tray | A4* Letter Legal Executive A5 A6 B5 B6 Folio Any | Sets the size of the paper in the MP tray. | |
2.Tray#1 |
A4* Letter Legal Executive A5 A6 B5 B6 Folio | Sets the size of the paper in the paper tray. | |
| |
3.Beeper | — | Off Low High | Adjusts the volume level of the beeper. | |
| |
4.Ecology | 1.Toner Save | On | Increases the page yield of the toner cartridge. | |
| |
| 2.Sleep Time | (000-240) | Conserves power. | |
| |
5.Tray Use | 1.Copy | Tray#1 Only MP Only
T1>MP | Selects the tray that will be used for Copy mode. | |
| |
2.Print | Tray#1 Only MP Only
T1>MP | Selects the tray that will be used for PC print. | |
| |
6.LCD Contrast | — | | Adjusts the contrast of the LCD. | |
2.Copy |
1.Quality | — | Text Photo | You can choose the Copy resolution for your type of document. | |
2.Brightness |
— | | Adjusts the brightness for copies. | |
3.Contrast |
— | | Adjusts the contrast for copies. | |
| |
4.Color Adjust | 1.Red | | Adjusts the red color for copies. | |
| |
| 2.Green | | Adjusts the green color for copies. |
| |
| 3.Blue | | Adjusts the blue color for copies. |
3.Printer |
1.Emulation | — | HP LaserJet BR-Script 3 | Chooses the emulation mode. | See Software User’s Guide on the CD-ROM. |
2.Print Options |
1.Internal Font | — | Prints a list of the machine’s internal fonts. | |
| |
2.Configuration | — | Prints a list of the machine’s printer settings. | |
| |
3.Test Print | — | Prints a test page. | |
3.Output Color |
— | Color B&W | Chooses color or black & white printed documents. If you choose Auto, the machine selects suitable option for the document (color or B&W) | |
4.Reset Printer |
1.Reset | — | Returns the PCL setting to the default settings. | |
2.Exit |
— | |
5.Calibration |
— | Calibrate Reset | Adjusts the color density or returns the color calibration to the factory setting. | |
6.Auto Regist. |
1.Registration | 1.Start | Adjust the print position of each color automatically. | |
2.Exit |
|
2.Frequency |
Low High Off | Set the interval time you want to carry out the auto registration. | |
| |
7.Manual Regist. | 1.Print Chart | — | Print the chart to manually check the registration of the colors. | See Software User’s Guide on the CD-ROM. |
2.Set Regist. |
1 Magenta Left 2 Cyan Left 3 Yellow Left 4 Magenta Center 5 Cyan Center 6 Yellow Center 7 Magenta Right 8 Cyan Right 9 Yellow Right | Sets the correction value on the chart you printed out from Print Chart. |
4.LAN |
1.TCP/IP | 1.BOOT Method | Static RARP BOOTP DHCP | Chooses the BOOT method that best suits your needs. | See Network User’s Guide on the CD-ROM. |
| |
| 2.IP Address | [000−255]. [000−255].
[000−255]. [000−255] | Enter the IP address. | |
| |
| 3.Subnet Mask | [000−255]. [000−255].
[000−255]. [000−255] | Enter the Subnet mask. | |
| |
| 4.Gateway | [000−255]. [000−255].
[000−255]. [000−255] | Enter the Gateway address. | |
| |
| 5.Node Name | BRNXXXXXX | Enter the Node name. | |
| |
| 6.WINS Config | Static | Chooses the WINS configuration mode. | |
| |
| 7.WINS Server | (Primary) 000.000.000.000 (Secondary) 000.000.000.000 | Specifies the IP address of the primary or secondary WINS server. | |
| |
| 8.DNS Server | (Primary) 000.000.000.000 (Secondary) 000.000.000.000 | Specifies the IP address of the primary or secondary DNS server. | |
| |
| 9.APIPA | Off | Automatically allocates the IP address from the link local address range. | |
| |
| 0.IPv6 | On | Sets the IPv6 protocol On. | |
| |
2.Ethernet | — | 100B-FD 100B-HD 10B-FD 10B-HD | Chooses the Ethernet link mode. | See Network User’s Guide on the CD-ROM. |
| |
3.Scan to FTP | — | Color 300 dpi Color 600 dpi B&W 200 dpi B&W 200x100 dpi | Sets the resolution to send the scanned data via the FTP server. | |
| |
0.Factory Reset | 1.Reset | 1.Yes | Restores the network settings to the factory default. | |
2.No |
|
2.Exit |
— | | |
5.Machine Info. |
1.Serial No. | — | — | You can check the serial number of your machine. | |
| |
2.Page Counter | — | Total List Copy Print | You can check the number of total pages the machine has printed during its life. | |
| |
3.User Settings | — | — | You can print a list of your settings including the network configuration. | |
| |
4.Parts Life | 1.Drum 2.Belt Unit 3.PF kit MP 4.PF kit 1 5.Fuser 6.Laser | — | You can check the percentage of a machine part’s life that remains available. | |
| |
5.Reset Menu | — | Drum Belt Unit PF kit MP PF kit 1 | Resets the machine part’s life counter. Appears when you replace the machine part. | |
-
+ 