Loading documents
Using the automatic document feeder (ADF)
The ADF can hold up to 50 pages and feeds each sheet individually. Use standard 80 g/m
2
paper and always fan the pages before putting them in the ADF.
Recommended environment
Temperature: 20 to 30°C
Humidity: 50% - 70%
Paper: APP Blue Flagship 70 g/m
2
, APP Gold Flagship 80 g/m
2
or Advanced Agro Double A 80 g/m
2
IMPORTANT
•
DO NOT leave thick documents on the scanner glass. If you do this, the ADF may jam.
•
DO NOT use paper that is curled, wrinkled, folded, ripped, stapled, paper-clipped, pasted or taped.
•
DO NOT use cardboard, newspaper or fabric.
•
To avoid damaging your machine while using the ADF, DO NOT pull on the document while it is feeding.
Note
To scan non-standard documents see
Using the scanner glass
.
•
Make sure documents written with ink are completely dry.
1
Unfold the ADF document output support flap
(1)
and the ADF support flap
(2)
.
2
Fan the pages well.
3
Place your document
face up, top edge first
in the ADF until you feel it touch the feed roller.
4
Adjust the paper guides
(1)
to fit the width of your document.
Page Top
IMPORTANT
Note 
