Loading documents

Using the automatic document feeder (ADF) (DCP-7040 and DCP-7045N)

The ADF can hold up to 35 pages and feeds each sheet individually. Use standard 80 g/m² paper and always fan the pages before putting them in the ADF.

Recommended environment

Temperature: 20 to 30° C
Humidity: 50% - 70%
Paper: Xerox Premier TCF 80 g/m² or Xerox Business 80 g/m²

CAUTION

	DO NOT leave thick documents on the scanner glass. If you do this, the ADF may jam.
	DO NOT use paper that is curled, wrinkled, folded, ripped, stapled, paper-clipped, pasted or taped.
	DO NOT use cardboard, newspaper or fabric.
	To avoid damaging your machine while using the ADF, DO NOT pull on the document while it is feeding.
	To scan non-standard documents see Using the scanner glass.

•	Make sure documents written with ink are completely dry.
•	Documents must be from 148 to 215.9 mm wide and from 148 to 355.6 mm long, and of a standard weight 80 g/m².

1	Fold out the ADF document output support flap (1) and the ADF support flap (2).
2	Fan the pages well.
3	Place your document, face up top edge first, in the ADF until you feel it touch the feed roller.
4	Adjust the paper guides (1) to fit the width of your document.

Page Top