Menu table

Home

Print

Previous

Next

Menu table

The factory settings are shown in Bold with an asterisk.

Choose & OK

Choose & OK

to accept

to exit

Main Menu	Submenu	Menu Selections	Options	Descriptions	Page
1.General Setup	1.Paper Type	—	Thin Plain* Thick Thicker Transparency Recycled Paper	Sets the type of paper in the paper tray.	Paper type
1.General Setup	2.Paper Size	—	A4* Letter Executive A5 A6 B5 B6	Sets the size of the paper in the paper tray.	Paper size
	3.Beeper	—	Off Low Med* High	Adjusts the volume level of the beeper.	Beeper volume
	4.Ecology	1.Toner Save	On Off*	Increases the page yield of the toner cartridge.	Toner Save
		2.Sleep Time	(00-99) 05Min*	Conserves power.	Sleep time
	5.LCD Contrast	—	-+ -+ -+ * -+ -+	Adjusts the contrast of the LCD.	LCD contrast
	6.User Settings	—	—	Lists your current settings.	User Settings List
	7.Network Config (DCP-7045N only)	—	—	Lists your network settings.	Network Configuration List (DCP-7045N only)
	0.Local Language	—	(Choose your language.)	Allows you to change the LCD language for your country.	Changing LCD language
2.Copy	1.Quality	—	Auto* Text Photo	You can choose the Copy resolution for your type of document.	Improving copy quality
	2.Contrast	—	-+ -+ -+ * -+ -+	Adjusts the contrast for copies.	Adjusting contrast
3.Printer (DCP-7045N only)	1.Emulation	—	Auto* HP LaserJet BR-Script 3	Chooses the emulation mode.	See Software User’s Guide on the CD-ROM.
	2.Print Options	1.Internal Font	—	Prints a list of the machine’s internal fonts.
		2.Configuration	—	Prints a list of the machine’s printer settings.
		3.Test Print	—	Prints a test page.
	3.Reset Printer	Reset Exit	—	Restores the printer settings to the original factory default settings.
	The factory settings are shown in Bold with an asterisk.

Main Menu	Submenu	Menu Selections		Options	Descriptions	Page
4.LAN (DCP-7045N only)	1.TCP/IP	1.Boot method	—	Auto* Static RARP BOOTP DHCP	Chooses the BOOT method that best suits your needs.	See Network User’s Guide on the CD-ROM.
		2.IP Address	—	[000-255]. [000-255]. [000-255]. [000-255]	Enter the IP address.
		3.Subnet Mask	—	[000-255]. [000-255]. [000-255]. [000-255]	Enter the Subnet mask.
		4.Gateway	—	[000-255]. [000-255]. [000-255]. [000-255]	Enter the Gateway address.
		5.Node Name	—	BRNXXXXXXXXXXXX	Confirm the Node name.
		6.WINS Config	—	Auto* Static	Chooses the WINS configuration mode.
		7.WINS Server	—	(Primary) 000.000.000.000 (Secondary) 000.000.000.000	Specifies the IP address of the primary or secondary WINS server.
		8.DNS Server	—	(Primary) 000.000.000.000 (Secondary) 000.000.000.000	Specifies the IP address of the primary or secondary DNS server.
		9.APIPA	—	On* Off	Automatically allocates the IP address from the link-local address range.
		0.IPv6	—	On Off*	Enable or Disable the IPv6 protocol. If you want to use the IPv6 protocol, visit http://solutions.brother.com/ for more information.	See Software User’s Guide on the CD-ROM.
	2.Ethernet	—	—	Auto* 100B-FD 100B-HD 10B-FD 10B-HD	Chooses the Ethernet link mode.
	0.Factory Reset	Reset	—	Yes No	Restore all network settings to factory default.
		Exit	—	—
	The factory settings are shown in Bold with an asterisk.

Main Menu	Submenu	Menu Selections	Options	Descriptions	Page
3.Machine Info. (DCP-7030 and DCP-7040) 5.Machine Info. (DCP-7045N)	1.Serial No.	—	—	You can check the serial number of your machine.	Checking the serial number
	2.Page Counter	—	Total List Copy Print	You can check the number of total pages the machine has printed during its life.	Checking the page counters
	3.Drum Life	—	—	You can check the percentage of a Drum life that remains available.	Checking the Drum life
	The factory settings are shown in Bold with an asterisk.

Home

Print

Previous

Next