CAUTION
| | Make sure that the machine has fully cooled down by leaving it disconnected from the power for at least 30 minutes before packing. |
When you transport the machine, use the packing materials that came with your machine. If you do not pack the machine correctly, you could void your warranty.
| 1 | Turn off the machine’s power switch. |
| 2 | Unplug all the cables and AC power cord from the machine. |
| 3 | Open the front cover. |
| 4 | Remove the drum unit and toner cartridge assembly. Leave the toner cartridge installed in the drum unit. |
| 5 | Place the drum unit and toner cartridge assembly into the plastic bag and seal the bag. |
| 6 | Close the front cover. |
| 7 | Wrap the machine in the plastic bag and place it in the original carton with the original packing material. |
| 8 | Pack the drum unit and toner cartridge assembly, AC cord and printed materials in the original carton as shown below: |
| 9 | Close the carton and tape it shut. |
