Home PrintPrevious Next

Scan to Image

When you choose Scan to Image, your document will be scanned and sent directly to the Macintosh you designated on your network. ControlCenter2 will activate the default graphics application on the designated Macintosh. You can change the Scan configuration. (See Image (example: Apple Preview).)
1
Put the document face up in the ADF, or face down on the scanner glass.
2
Press Graphic (Scan).
3
Press Bsymbol.utri or Bsymbol.dtri to choose Scan to Image.
Press OK.
4
Press Bsymbol.utri or Bsymbol.dtri to choose the destination Macintosh you want to send to.
Press OK.
If the LCD prompts you to enter a Pin number, enter the 4-digit Pin number for the destination Macintosh on the control panel.
Press OK.
5
Press Start.
The machine starts the scanning process.
Note Note
If you want the scanned data in colour, choose colour in the scan type on the Device Button tab of the ControlCenter2 configuration. If you want the scanned data in black and white, choose black and white in the scan type on the Device Button tab of the ControlCenter2 configuration. (See Image (example: Apple Preview).)
Page Top
Home PrintPrevious Next