Search

Home > Fax > Send a Fax > Send a Fax at the End of a Conversation > Set the Fax Logic (Sending and Receiving Sequence)

Set the Fax Logic (Sending and Receiving Sequence)

Related Models:MFC‑T920DW
You can change the process of manual fax send or receive.

If you often send or receive a fax manually to/from the other party at the end of a conversation, set the [Fax Mode] to [Easy Mode].

If you set to [Easy Mode]: You can send or receive a fax manually just simply press Mono Start. If you are a caller, press Mono Start to send a fax. If you are a receiver, press Mono Start to receive a fax.

If you set to [Advanced Mode]: No matter you are a caller or receiver, you can select you will send or receive a fax manually. When you press Mono Start, the machine will ask you: [Send/Receive?]. If you want to send a fax, press [Send]. If you want to receive a fax, press [Receive].

image

Even if you set either [Easy Mode] or [Advanced Mode] and if there is a document in the ADF, the document in the ADF will be sent by pressing Mono Start.

  1. Press Settings.
  2. Press image or image to select the following:
    1. Select [Fax]. Press OK.
    2. Select [Miscellaneous]. Press OK.
    3. Select [Fax Mode]. Press OK.
  3. Press image or image to select [Easy Mode] or [Advanced Mode]. Press OK.
  4. Press Stop/Exit.
Did you find the information you needed?