Search

Site Map

Set Sleep Mode Countdown

The Sleep Mode (or Power Save Mode) setting can reduce power consumption. When the machine is in Sleep Mode, it acts as if it is turned off. The machine will wake up and start printing when it receives a print job. Use these instructions to set a time delay (countdown) before the machine enters Sleep Mode.
  • The timer will restart if any operation is carried out on the machine, such as receiving a print job.
  • The factory setting is five minutes.
  1. Start Brother iPrint&Scan.
    • Windows

      Launch image(Brother iPrint&Scan).

    • Mac

      In the Finder menu bar, click Go>Applications, and then double-click the iPrint&Scan icon.

    The Brother iPrint&Scan screen appears.
  2. If your Brother machine is not selected, click the Select your Machine button, and then select your model name from the list. Click OK.
  3. Click image(Machine Settings) to configure the settings.
  4. If required, type the password in the Login field, and then click Login.
    image
    The default password to manage this machine’s settings is located on the back of the machine and marked "Pwd".
  5. Go to the navigation menu, and then click General>Sleep Time.
    image
    Start from image, if the navigation menu is not shown on the left side of the screen.
  6. Enter the Sleep Time field (1-60).
  7. Click Submit.
Related Information
Did you find the information you needed?

find moreaccept