Home > Introduction to Your Machine > Control Panel Overview
Control Panel Overview
![image](../img/GUID-6F84CE50-F9F1-48B0-BA8E-B62E54E6351A-low.gif)
(Stop) Power On/Off
-
- Press to stop an operation.
- Press to exit from a selected mode.
- Press
to turn on the machine.
Press and hold down
to turn off the machine and cancel all of the remaining operations. The Power LED blinks and stays on for a few seconds before turning itself off.
If you turn off the machine using
, it will still clean the print head periodically to maintain print quality. To prolong print head life, provide better ink efficiency, and maintain print quality, keep your machine connected to a power source at all times.
- Power LED
- Indicates the machine's status.
- Warning LED
- Indicates when the machine detects an error or is in Reset Mode.
- Ink LED
- Indicates when the machine detects an ink error or is in Maintenance Mode.
- WiFi Button/LED (DCP-T420W/DCP-T425W/DCP-T426W)
-
- Press the button by itself or simultaneously with another button to configure the wireless settings or print network reports. Use only when the machine is idle.
- Press this button and Colour Start simultaneously to restart the Wi-Fi if you cannot connect to your wireless network.
- Press simultaneously with
(Stop) to access the Wi-Fi Mode.
- Indicates the wireless network status.
Connected Connecting Off
- Copy Shortcut
-
- Press to make a 2 in 1 ID copy.
If necessary, one of the specific copy functions can be set as a function for this button using Web Based Management. By default, 2 in 1 ID copy is set.
- Press simultaneously with
(Stop) to access the Maintenance Mode.
- Mono Start
-
- Press to start making copies in monochrome.
- Press simultaneously with Colour Start to start scanning documents (in colour or monochrome, depending on the scan setting).
- Press simultaneously with
(Stop) to access the Reset Mode.
- Colour Start
-
- Press to start making copies in full colour.