Press to stop an operation.

Press to exit from a selected mode.

Press to turn on the machine.

Press and hold down to turn off the machine and cancel all of the remaining operations. The Power LED blinks and stays on for a few seconds before turning itself off.

If you turn off the machine using , it will still clean the print head periodically to maintain print quality. To prolong print head life, provide better ink efficiency, and maintain print quality, keep your machine connected to a power source at all times.

Press the button by itself or simultaneously with another button to configure the wireless settings or print network reports. Use only when the machine is idle.

Press this button and Colour Start simultaneously to restart the Wi-Fi if you cannot connect to your wireless network.

Press simultaneously with (Stop) to access the Wi-Fi Mode.

Indicates the wireless network status.

Press to make a 2 in 1 ID copy.

If necessary, one of the specific copy functions can be set as a function for this button using Web Based Management. By default, 2 in 1 ID copy is set.

Press simultaneously with (Stop) to access the Maintenance Mode.

Press to start making copies in monochrome.

Press simultaneously with Colour Start to start scanning documents (in colour or monochrome, depending on the scan setting).

Press simultaneously with (Stop) to access the Reset Mode.