Search

Site Map

Home > Introduction to Your Machine > Control Panel Overview

Control Panel Overview

image
  1. image(Paper)
    Press this button to set the Paper Size and Paper Type settings.
  2. A4 LED/10 x 15 cm LED
    Indicates the Paper Size and Paper Type setting selected.
    image
    • Paper type: Plain
    • Paper size: A4

    (For printing standard documents)

    image
    • Paper type: Other glossy
    • Paper size: 10 x 15 cm

    (For printing photos)

    image
    		 Custom Settings
  3. Wi-Fi LED
    • Indicates the wireless network status.
    image Connecting (Blinking)
    image Connected (Lit)
    image Disconnected (Blinking slowly)
    image Off
  4. Power LED
    Indicates the machine's status.
  5. MONO COPY
    • Press to start making copies in monochrome.
    • Press simultaneously with COLOUR COPY to start scanning documents (in colour or monochrome, depending on the scan setting).
    • Press simultaneously with image(STOP) to access the Reset Mode.
  6. COLOUR COPY
    • Press to start making copies in full colour.
  7. Ink LED
    Indicates when the machine detects an ink error or is in Maintenance Mode.
  8. Warning LED
    Indicates when the machine detects an error or is in Reset Mode.
  9. image(STOP) Power On/Off
    • Press to stop an operation.
    • Press to exit from a selected mode.
    • Press image(STOP) to turn on the machine.

      Press and hold down image(STOP) to turn off the machine and cancel all of the remaining operations. The Power LED blinks and stays on for a few seconds before turning itself off.

      If you turn off the machine using image(STOP), it will still clean the print head periodically to maintain print quality. To prolong print head life, provide better ink efficiency, and maintain print quality, keep your machine connected to a power source at all times.

  10. image(Wi-Fi)
    • Press the button by itself or simultaneously with another button to configure the wireless settings or print network reports. Use only when the machine is idle.
    • Press this button and COLOUR COPY simultaneously to restart the Wi-Fi if you cannot connect to your wireless network.
    • Press simultaneously with image(STOP) to access the Wi-Fi Mode.
Related Information
Did you find the information you needed?

find moreaccept