Search

Home > Fax > Receive a Fax > Set Fax Detect

Set Fax Detect

Related Models:MFC‑J1010DW

If Fax Detect is On: The machine receives a fax call automatically, even if you answer the call. When the message that your machine is receiving a fax appears on the LCD or when you hear “chirps” through the handset you are using, just replace the handset. Your machine will do the rest.

If Fax Detect is Off: If you are at the machine and answer a fax call by lifting the handset, press the Start button, and then select [Receive] to receive the fax. If you answered at an extension or external telephone, press *51 (*91 for New Zealand).

image
  • If Fax Detect is set to [On], but your machine does not connect a fax call when you lift an extension or external telephone handset, press the remote activation code *51 (*91 for New Zealand).
  • If you send faxes from a computer on the same telephone line and the machine intercepts them, set Fax Detect to [Off].
  1. Press Settings.
  2. Press image or image to select the following:
    1. Select [Fax]. Press OK.
    2. Select [Setup Receive]. Press OK.
    3. Select [Fax Detect]. Press OK.
    4. Select [On] (or [Off]). Press OK.
  3. Press Stop/Exit.
Did you find the information you needed?