Search

Site Map

Home > User Authentication > Use Secure Function Lock 3.0 > Configure Secure Function Lock 3.0 Using Web Based Management

Configure Secure Function Lock 3.0 Using Web Based Management

  1. Start your web browser.
  2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is your machine's IP address).

    For example:

    https://192.168.1.2

    Your machine's IP address can be found in the Network Configuration Report.

  3. If required, type the password in the Login field, and then click Login.
    image
    The default password to manage this machine’s settings is located on the back or base of the machine and marked "Pwd". Change the default password by following the on-screen instructions when you first log in.
  4. In the left navigation bar, click Administrator > User Restriction Function or Restriction Management.
    image
    If the left navigation bar is not visible, start navigating from image.
  5. Select Secure Function Lock.
  6. Click Submit.
  7. Click the Restricted Functions menu.
  8. Configure the settings to manage restrictions per user or per group.
  9. Click Submit.
  10. Click the User List menu.
  11. Configure the User List.
  12. Click Submit.
image
You can also change the user list lockout settings in the Secure Function Lock menu.
Related Information
Did you find the information you needed?

find moreaccept