Home > User Authentication > Use Secure Function Lock 3.0 > Register an External IC Card Reader
Register an External IC Card Reader
When you connect an external IC (Integrated Circuit) card reader, use Web Based Management to register the card reader. Your machine supports HID class driver supported external IC card readers.
- Start your web browser.
- Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is your machine's IP address).
For example:
https://192.168.1.2
Your machine's IP address can be found in the Network Configuration Report.
- If required, type the password in the Login field, and then click Login.
The default password to manage this machine’s settings is located on the back or base of the machine and marked "Pwd". Change the default password by following the on-screen instructions when you first log in. - In the left navigation bar, click .If the left navigation bar is not visible, start navigating from
. - Enter the necessary information, and then click Submit.
- Restart your Brother machine to activate the configuration.
- Connect the card reader to your machine.
- Touch the card to the card reader when using card authentication.
Did you find the information you needed?