Home > Paper Handling > Load Documents > Load Receipts, Clippings, Photos, and Other Documents
Load Receipts, Clippings, Photos, and Other Documents
- Make sure documents with ink or correction fluid are completely dry.
- A Carrier Sheet is required when scanning documents of irregular size. The Carrier Sheet is not included with your machine and must be ordered separately.
For more information, visit your local Brother website or contact your local Brother dealer.
- Make sure the Document Separation Switch is set to
(Continuous Feed Mode). 
- Insert the document into the optional Carrier Sheet.
- Set the document in the centre of the Carrier Sheet and align the top edge of the document with the top edge of the Carrier Sheet.
- If the receipt is longer than the Carrier Sheet, you can fold the receipt in two places so that it overlaps when you insert it into the Carrier Sheet.
- Adjust the Paper Guides (1) to fit the width of the Carrier Sheet.
- Place the Carrier Sheet in the ADF between the Paper Guides until you feel it touch the inside of the machine.
Did you find the information you needed?