Search

Home > Security > Configure Certificates for Device Security > Create a Self-signed Certificate

Create a Self-signed Certificate

Related Models:ADS‑1350W / ADS‑1800W
  1. Start your web browser.
  2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is your machine's IP address).
    For example:

    https://192.168.1.2

  3. If required, type the password in the Login field, and then click Login.
    image
    The default password to manage this machine’s settings is located on the bottom of the machine and marked "Pwd". Change the default password by following the on-screen instructions when you first log in.
  4. In the left navigation bar, click Network>Security>Certificate.
    image
    If the left navigation bar is not visible, start navigating from image.
  5. Click Create Self-Signed Certificate.
  6. Enter a Common Name and a Valid Date.
    • The length of the Common Name is less than 64 bytes. Enter an identifier, such as an IP address, node name, or domain name to use when accessing this machine through SSL/TLS communication. The node name is displayed by default.
    • A warning will appear if you use the IPPS or HTTPS protocol and enter a different name in the URL than the Common Name that was used for the self-signed certificate.
  7. Select your setting from the Public Key Algorithm drop-down list. The default setting is RSA(2048bit).
  8. Select your setting from the Digest Algorithm drop-down list. The default setting is SHA256.
  9. Click Submit.
Did you find the information you needed?