You can configure secured E-mail sending with user authentication or E-mail sending and receiving using SSL/TLS on the Web Based Management screen.
1 | Start your web browser. |
2 | Type “http://machine’s IP address/” into your browser (where “machine’s IP address” is the machine’s IP address). • | For example: http://192.168.1.2/ |
|
3 | No password is required by default. Enter a password if you have set one and click . |
4 | Click Network. |
5 | Click Protocol. |
6 | Click Advanced Setting of POP3/SMTP and make sure that the status of POP3/SMTP is Enabled. |
7 | You can configure the POP3/SMTP settings on this page. Note • | For more information, see the Help text in Web Based Management. | • | You can also confirm whether the E-mail settings are correct after configuration by sending a test E-mail. | • | If you do not know the POP3/SMTP server settings, please contact your system administrator or ISP (Internet Service Provider) for details. |
|
8 | After configuring, click Submit. The Test E-mail Send Configuration dialog box appears. |
9 | Follow the instructions on-screen if you want to test with the current settings. |