![]() ![]() | ![]() ![]() |
1 | Start your web browser. |
2 | Type “https://Common Name/” into your browser. (Where “Common Name” is the Common Name that you assigned for the certificate, such as an IP address, node name or domain name. For how to assign a Common Name for the certificate, see Using Certificates for device security.) |
3 | No password is required by default. Enter a password if you have set one and press ![]() |
4 | You can now access the machine using HTTPS. If you use the SNMPv3 protocol, follow the steps below. |
5 | Click Network. |
6 | Click Protocol. |
7 | Make sure that the SNMP setting is enabled, and then click Advanced Setting of SNMP. |
8 | You can configure the SNMP settings from the screen below. ![]() |
![]() ![]() | ![]() ![]() |