Home PrintPrevious Next

Changing the Scan to FTP configuration using a web browser

Scan to FTP allows you to scan a document directly to an FTP server on your local network or on the Internet. For more details on Scan to FTP, see the User’s Guide.
1
Click Scan on the machine’s web page, and then click Scan to FTP/Network.
2
You can choose what profile numbers (1 to 10) to use for Scan to FTP settings.
You can also store two user defined file names that can be used for creating an FTP Server Profile in addition to the seven preset file names in Create a User Defined File Name. A maximum of 15 characters can be entered in each of the two fields.
3
Click Submit.
4
Click Scan to FTP/Network Profile on Scan page.
Now you can configure and change the following Scan to FTP settings using a web browser.
•
Profile Name (Up to 15 characters)
•
Host Address (FTP server address)
•
Username
•
Password
•
Store Directory
•
File Name
•
Quality
•
File Type
•
Document Size
•
File Size
•
Auto Deskew
•
Skip Blank Page
•
Passive Mode
•
Port Number
You can set Passive Mode to Off or On depending on your FTP server and network firewall configuration. By default this setting is On, you can also change the port number used to access the FTP server. The default for this setting is port 21. In most cases these two settings can remain set as default.
Note Note
Scan to FTP is available when FTP server profiles are configured using Web Based Management.
5
After setting, click Submit.
Page Top
Home PrintPrevious Next