How to configure the machine settings using Web Based Management (web browser)

A standard web browser can be used to change your scan server settings using the HTTP (Hyper Text Transfer Protocol) or HTTPS (Hyper Text Transfer Protocol over Secure Socket Layer).

Note

•	We recommend to use HTTPS protocol for your security when configuring the settings using Web Based Management.
•	When you use the HTTPS protocol for Web Based Management configuration, your browser will display a warning dialog box.
•	If you have not configured your PC and device to use certificates, see Using Certificates for device security.

Start your web browser.

Type “http://machine’s IP address/” into your browser (where “machine’s IP address” is the machine’s IP address).

•

For example:

http://192.168.1.2/

Note

•

If you are using a Domain Name System or enable a NetBIOS name, you can enter another name such as “SharedScanner” instead of the IP address.

•	For example: http://SharedScanner/

If you enable a NetBIOS name, you can also use the node name.

•	For example: http://brnxxxxxxxxxxxx/

You can find the NetBIOS name from the control panel as Node Name.

•

For Macintosh users, you can have easy access to the Web Based Management System by clicking the machine icon on the Status Monitor screen. For more information, see the User’s Guide.

No password is required by default. Enter a password if you have set one and click

You can now change the scan server settings.

Note

If you have changed the protocol settings, restart the machine after clicking Submit to activate the configuration.

Page Top