Scan Plastic Cards

Scan Plastic Cards

1

Click the

(ControlCenter2) icon in the menu bar and then select Open.

The ControlCenter2 window will appear.

Screen

Note

If the

(ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon.
The ControlCenter icon is in Macintosh HD/Applications/Brother.
The

(ControlCenter2) icon will appear in the menu bar.

2

Click the button for the Scan-to action you want to change (Image, OCR, E-mail, or File) while holding down the Control key. The Scan-to action setting dialog box will appear (the example below uses Image).

3

Click the Device Button tab.

Screen

4

Check the Plastic Card Mode check box.

5

Change other settings if needed (see Change Scan Settings).

6

Load a plastic card (see Loading Business Cards and Plastic Cards).

Note

Load only one plastic card at a time.

7

Press Scan to PC. The machine starts scanning.

Important

If a feed error should occur while scanning, open the front cover and carefully remove the plastic card in order to prevent damage to the card.

Note

Plastic Card Mode automatically uses these settings:

Resolution: 600 x 600 dpi

Document Size: 2 in 1 (Business Card)

Duplex(two-sided) Scanning: On (Short-edge binding)

Auto Deskew: Off

Multifeed Detection: Off

Automatic Image Rotation: Off

Original Layout	Scan Result