Home PrintPrevious Next

Scan Plastic Cards

1
Click the Graphic (ControlCenter4) icon in the task tray and then select Open from the menu.
The ControlCenter4 window will appear.
Note Note
You can also start ControlCenter4 by doing one of the following:
•
(Windows® XP, Windows Vista®)
Double-click the Graphic (ControlCenter4) icon in the task tray.
•
Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name).
2
Click the Device Settings tab (the example below uses Home Mode).
Screen
3
Click the Device Scan Settings button. The Device Scan Settings dialog box will appear.
Screen
4
Select the tab for the Scan-to action you want to change (Image, OCR, E-mail, or File).
5
Check the Plastic Card Mode check box.
6
Change other settings if needed (see Change Scan Settings).
7
Load a plastic card (see Loading Business Cards and Plastic Cards).
Note Note
Load only one plastic card at a time.
8
Press Scan to PC. The machine starts scanning.
Important Important
If a feed error should occur while scanning, open the front cover and carefully remove the plastic card in order to prevent damage to the card.
Note Note
Plastic Card Mode automatically uses these settings:
Resolution: 600 x 600 dpi
Document Size: 2 in 1 (Business Card)
Duplex(two-sided) Scanning: On (Short-edge binding)
Auto Deskew: Off
Multifeed Detection: Off
Automatic Image Rotation: Off
Original Layout
Scan Result
Graphic
Graphic
Page Top
Home PrintPrevious Next