1 | Click the (ControlCenter2) icon in the menu bar and then select Open. The ControlCenter2 window will appear. |
2 | Click the DEVICE SETTINGS tab. |
3 | Click the Scan to PC Settings button. The Remote Setup window will appear. |
4 | Select Image from the drop-down list. |
5 | Click the OK button to close the Remote Setup window. |
6 | Click the SCAN tab on the ControlCenter2 window. |
7 | While holding down the Control key click the Image button. The Scan To Image dialog box will appear. |
8 | Click the Device Button tab. |
9 | Change other settings if needed (see Change Scan Settings). |
10 | Load your document. |
11 | Press Scan to PC. The machine starts scanning. |