Heat Transfer Vinyl
Ideal for creating original T‑shirts or tote bags.
Heat Transfer Vinyl is a heat‑activated sheet that can be half‑cut without a cutting mat.
Cut your design in reverse, weed the unwanted areas, and then press the design onto fabric by applying heat from the attached transfer sheet.
Glitter HTV [0.34 mm]
Matless Cutting (Half Cut)
| Cutting Mat | ： | Not required |
| Cutting Types | ： | Half Cut |
| Cut Pressure | ： | Auto |
Matte HTV [0.22 mm]
Matless Cutting (Half Cut)
| Cutting Mat | ： | Not required |
| Cutting Types | ： | Half Cut |
| Cut Pressure | ： | Auto |
Flocked HTV [0.5 mm]
Matless Cutting (Half Cut)
| Cutting Mat | ： | Not required |
| Cutting Types | ： | Half Cut |
| Cut Pressure | ： | Auto |
Metallic HTV [0.21 mm]
Matless Cutting (Half Cut)
| Cutting Mat | ： | Not required |
| Cutting Types | ： | Half Cut |
| Cut Pressure | ： | +1 |
| Note | ： | Materials with a two-layer surface require increasing cutting pressure. |
Rubber‑backed HTV [0.24 mm]
Cutting with a Mat
| Cutting Mat | ： | Standard Tack Adhesive Mat |
| Cutting Types | ： | Half Cut |
| Cut Pressure | ： | Auto |
| Note | ： | For materials that do not work well with the holder and may jam due to friction, we recommend using a cutting mat. |
[Note]
- Bellissimo is available only in certain country or region. For details, please check with your local distributor.
- The information and samples shown are only representative examples and do not guarantee quality or performance. Please test with your own materials.
- Some materials shown may not be available in certain country or region.
- For proper handling and usage of each material, please refer to the instructions provided by the manufacturer of the material you purchased.
- Some designs may not be available in the Artspira app depending on your country or region.