#1001
The bobbin thread is almost empty.
The embroidery machine has detected that the bobbin is low on thread.
Please follow the steps below to troubleshoot the problem.
Situation
For examples,
- The bobbin thread is run out.
- The embroidery machine sensed that the lower thread has run out due to incorrect winding of the lower thread on the bobbin.
There are a couple of reasons why the machine might be giving you an issue.
Please click through below topics to troubleshoot.
| Step 1: | Replace the bobbin thread. |
| Step 2: | Winding the thread to the empty bobbin in the correct way. And then install the bobbin. |
Step 1: Replace the bobbin thread.
▼Please proceed to the next step.▼
Step 2: Winding the thread to the empty bobbin in the correct way. And then install the bobbin.
▼If the problem is not resolved, please proceed to the next step below.▼
Please contact customer support.
Please tell the support office that you have checked #1001 troubleshooting.
It may be repaired. Please have your warranty card (receipt showing the date you bought it) ready.
