Jump Stitch and Jump Stitch Trimming

Machine thread trimming according to settings specified in Layout & Editing

If is selected in the [Design Settings] dialog box of Layout & Editing, trimming can be turned on or off at each jump stitch location.
These settings are saved in embroidery data files (.pes).
If you are using our multi-needle embroidery machine with the Jump Stitch Trimming function turned on to embroider this imported .pes file, the machine will trim the thread according to the PES data settings.

For details on the jump stitch trimming function of the machine, refer to the instruction manual provided with your embroidery machine.

Specifying trimming settings in Layout & Editing

Select in the [Design Settings] dialog box.
Specifying the Design Page Settings
Display the trimming locations in Layout & Editing.
Memo of Changing the display of the embroidery design
Turn on/off jump stitch trimming for each embroidery pattern.
Jump Stitch Trimming

If necessary, change settings for the following.

Automatically turning off trimming when the jump stitch length is less than that specified.
Jump Stitch Trimming and About Minimum jump stitch length for thread trimming
Default setting for turning on/off jump stitch trimming when a new embroidery pattern is created.
Adding jump stitch trimming to new patterns

Stitching
Jump stitch

These settings are applied only when embroidering with our multi-needle embroidery machines. These settings are not applied with any other embroidery machine.