Transferring directly to a machine's memory

Designs can be transferred to embroidery machines that can be connected to a computer using a USB cable.

1. Connect the embroidery machine to the computer.
2. Click the [Home] tab.
3. Click [Send] in the [Sew] group, click [Send to Your Machine], and then select the desired drive.
   

   Data transfer begins.

   If there is already a file with the same name at the destination, the following dialog box appears. Select whether to overwrite the existing file, to stop copying or to copy the file using a different name.

   
4. After the data has been transferred, the message "Finished outputting data." appears, indicating that the transfer is finished. Click [OK].
   • For details on transferring designs with this method, refer to the instruction manual provided with your embroidery machine.
   • If multiple machines are connected, specify where the data is to be transferred in the area shown below.
     
   • If the connected embroidery machine has been set to Link mode, the command [Send to Your Machine], mentioned in this procedure, cannot be selected. To select this command, return the machine to normal mode.