Basic requirements for Cutwork functions

Set the "Machine Type" to multi-needle embroidery machine

For the Cutwork functions to be available, click , then [Design Settings]. Under [Machine Type], select .

Outline shapes and text can be used to create a cutwork pattern

Use a multi-needle machine that has been upgraded to work with Cutwork functions

The embroidery machine should be set to cutwork mode in the settings screen before starting to embroider. Refer to the included instruction manual for the details of embroidery machine operation.

Cutwork functions cannot be used with single-needle embroidery machines. In addition, some multi-needle machines may not support the functions. Be sure to check that your machine is compatible with the cutwork functions.