Tutorial 10-3: Embroidering With the Jumbo Frame
- Step 1 Selecting the Design Page size
- Step 2 Creating the embroidery design
- Step 3 Checking a divided pattern
- Step 4 Attaching stabilizer to the fabric
- Step 5 Embroidering
This section describes the procedures for creating embroidery data and for embroidering using the jumbo frame (frame size: 360 × 360 mm; with mounts on both sides of the embroidery frame).
Jumbo frame: 360 × 360 mm embroidery frame
- If the jumbo frame was selected, the size of the Design Page becomes 350 × 350 mm in order to create margins that allow automatic positioning using the built-in camera.
- The jumbo frame described here was designed specifically for our multi-needle embroidery machines equipped with a built-in camera. It cannot be used with any other machine, such as single-needle embroidery machines. Check the instruction manual provided with your multi-needle embroidery machine to determine if it is compatible with the jumbo frame.
For details on embroidering using the camera and on affixing the embroidery positioning stickers, refer to the instruction manual provided with the embroidery machine.
The sample file for this tutorial is located at Documents (My documents)\PE-DESIGN 11\Tutorial\Tutorial_10.