Embossing/Engraving

Multiple shape patterns can be selected to create an engraved/embossed effect.

1. Top
2. Bottom

1. Draw a shape.
   

   In this example, the fill stitch is selected for region sewing.

2. Draw a shape overlapping the shape drawn in step 1.
   
3. Select the two shapes, and then click the [Home] tab.
4. Click [Stamp/Emboss] in the [Edit] group, and then click the desired command under [Convert from Outline].
   

   Engraved Line
   The bottom shape is engraved with the outline of the shape on top.

   

   Engraved Region
   An engraving is made in the bottom shape from the shape on top.
   For best result, select [Satin Stitch] for region sewing of the bottom shape.

   

   Embossed Region
   An embossing is made in the bottom shape from the shape on top.
   For best result, select [Fill Stitch] for region sewing of the bottom shape.

   

   This effect can be edited with the Edit Stamp tool.

   • These commands can only be used with shape pattern.
   • The bottom shape pattern must have one of the following sew types specified for region sewing.
     • Satin Stitch
     • Fill Stitch
     • Programmable Fill Stitch (Prog. Fill Stitch)
   • In order to use the [Engraved Line] command, [Line sew type] for the shape pattern must be set to any setting other than [Not Sewn (Line)].
     In order to use the [Engraved Region] or [Embossed Region] commands, [Region sew type] for the shape pattern must be set to any setting other than [Not Sewn (Region)].