Jump Stitch Trimming
The Jump Stitch Trimming function can be turned on or off.
These settings are applied only when embroidering with our multi-needle embroidery machines. Before these settings can be specified, select 
under [Machine Type] in the [Design Settings] dialog box.
Specifying the Design Page Settings
The Jump Stitch Trimming button (
) is available in the [Sewing Order] pane.
Select a frame, and then click 
.
- ON
- OFF
appears if the thread trimming setting is not the same for all patterns in a frame with 
beside it.- The thread is cut before the thread color is changed, even if [Jump Stitch Trimming] has been turned off for the frame.
- Click the [View] tab, and then select the [View Thread Trimming] check box in the [View Mode] group. To view the thread trimming locations in the Design Page.
About Minimum jump stitch length for thread trimming
- The jump stitch length can be specified on the [Output] tab into the [Design Settings] dialog box. (To displayed it, click
, then [Design Settings]).
- If the jump stitch length is less than the length specified for [Minimum jump stitch length for thread trimming], the thread will not be cut, even if [Jump Stitch Trimming] has been set.
- Whether or not [Minimum jump stitch length for thread trimming] is available differs depending on the selected machine model. For details, refer to the instruction manual for the machine.
The default setting can be specified for whether or not thread trimming is applied to objects that are created.
Click [Option] above the Ribbon, and then click [Options] to display the [Options] dialog box. Next, click [Jump Stitch Trimming], and then select or clear the [Add jump stitch trimming to the entered patterns.] check box.
Jump Stitch Trimming, Machine thread trimming according to settings specified in Layout & Editing and Adding jump stitch trimming to new patterns