Needle/thread exchange mode

While the machine is in this mode, the Threading position button, Thread cutter button, “Start/Stop” button and Bluetooth button are locked in order to prevent the needle from moving by accident. By using this mode when changing the needle, threading the machine with the upper thread or installing the bobbin, you can safely install or replace the needle.

Hold down the Accept button to enter Needle/thread exchange mode. (The “Start/Stop” button LED lights steadily in orange, and the Accept button LED blinks.)

In this mode, each press of the Accept button switches the presser foot between its raised and lowered positions.

While the machine is in Needle/thread exchange mode, hold down the Accept button to exit the mode.