Line and Region Settings |

Line and Region Settings

Line Settings

Shows/Changes the stitch type and color for the selected line.
Select the line to be changed.
Shows/Changes the stitch settings for the selected line.
Save the pattern drawing data and embroidery data.
Proceed to embroidery edit screen.
Use the projector to project the pattern. (Checking the Embroidery Pattern with the Projector)
See detailed information about the pattern.
Preview the pattern.

Line stitch settings

Zigzag stitch /
Appliqué zigzag stitch

[Zigzag width]	Specifies the width of the stitch.
[Density]	Specifies the density of the stitch.

Running stitch /
Triple stitch

[Run Pitch]

Specifies the length of the stitch.

[Under sewing]

Turn on or off the under sewing function.

Single stitch can be embroider when selecting the running stitch and turning off the under sewing function. Although number of thread cut may increase.

Candlewicking stitch

[Size]	Increases/reduces the size of the pattern.
[Spacing]	Specifies the spacing of the candlewicking stitch.

Chain stitch

[Size]	Increases/reduces the size of the pattern.
[Thickness]	Sets repeated embroidering at the same part.

E stitch

[Stitch Width]	Increases/reduces the size of the pattern.
[Spacing]	Specifies the spacing of the E stitch.
[Thickness]	Sets repeated embroidering at the same part.
[Flip]	Specifies if the decorative line shows up inside or outside.

V stitch

[Stitch Width]	Increases/reduces the size of the pattern.
[Spacing]	Specifies the spacing of the V stitch.
[Thickness]	Sets repeated embroidering at the same part.
[Flip]	Specifies if the decorative line shows up inside or outside.

Motif stitches

[Size]	Increases/reduces the size of the pattern.
[Spacing]	Specifies the spacing of the motif stitch.
[Flip]	Specifies to flip the stitch or not to flip.

Region Settings

Shows/Changes the stitch type and color for the selected region.
Select the region to be changed.
Shows/Changes the stitch settings for the selected region.
Save the pattern drawing data and embroidery data.
Proceed to embroidery edit screen.
Use the projector to project the pattern. (Checking the Embroidery Pattern with the Projector)
See detailed information about the pattern.
Preview the pattern.

Region Stitch Settings

Fill stitch pattern

[Direction]	Specifies the embroidering direction. Select [Manual] to change to the desired direction of fill stitch.
[Density]	Specifies the stitch density of fill stitch.
[Pull compensation]	Specifies to correct the shrinkage of the pattern by slightly shortening or lengthening the stitching. Change the setting after you test embroider the pattern and can check the shrinkage.
[Under sewing]	Select if you need or do not need the under sewing for the stabilized fabric.

Stippling pattern

[Run Pitch]	Specifies the length of a stitch of the stippling stitch.
[Spacing]	Specifies the spacing between the stitches when embroidering the stippling stitch.
[Distance]	Specifies the offset from the pattern outline.
[Stitch]	Specifies the stitch type (Single/Triple stitch).

Decorative fill patterns

[Size]	Increases/reduces the size of the pattern.
[Direction]	Specifies the rotation angle of the pattern.
[Outline]	Select whether (turned on) or not (turned off) the outline is also converted to embroidery data. If turned on, the number of thread jumps can be reduced.
[Random shift]	Randomly varies the line. If a setting of 1 or more is specified for [Random shift], a [Type] setting for the [Random shift] can be selected.
[Position Offset]	Specifies the reference point for the pattern.
[Thickness]	Sets repeated or single stitching of the pattern.