Applying Appliqué Settings to the Second Pattern

1. Touch in My Design Center to use stamps.

   

2. Touch (Line Property) to select the stitch type.

   For this example, touch to specify that the pattern is not to be sewn.

3. Touch , and then touch the line to apply the settings to it.

4. Touch (Region Property), and then select the thread color and fill type.

   For this example, select moss green, touch , and then select the fill stitch pattern.

5. Touch , and then touch the strawberry stem to apply the settings to it.

   

6. Touch [Next].

7. Touch [Set], and then touch [OK] to display the pattern editing screen.

8. Adjust the position of the strawberry stem.

   

9. Touch [Edit], touch , and then touch [Appliqué patch for selected colors].

10. Select the area to be made into an appliqué piece by the thread color, and touch [Next].

    For this example, select [Moss Green].

11. Specify the appliqué outlining, stitch type and stitch settings, and touch [Preview]. If the settings are finished, touch [Next].

    For this example, select (Outside) and [Zigzag stitch]. Set the stitch width to 3.5 mm.

12. Specify settings for the appliqué steps and for thread colors that are not to be sewn. After specifying the settings, touch [OK].

    After this, cut the [APPLIQUE MATERIAL] with the cutting machine. Select [APPLIQUE MATERIAL], and touch to specify not to sew.

    
    • The embroidery pattern is moved to the end of the embroidering order when appliqué settings are applied to it.
      If applying appliqué settings after combining the pattern, apply appliqué settings to the strawberry body then strawberry stem to sew strawberry body first.