Applying Appliqué Settings to the First Pattern
- The patterns arranged first on the editing screen are sewn first. Arrange the patterns in the desired embroidering order.
Select the stamp for strawberry body.
Touch
(Line Property) to select the stitch type.For this example, touch
to specify that the pattern is not to be sewn.Touch
, and then touch all lines to apply the settings to it.Touch
(Region Property), and then select the thread color and fill type.For this example, select red, touch
to select the fill stitch pattern.Touch
, and then touch the strawberry body to apply the settings to it.
As before, specify the thread color and fill stitch pattern for the strawberry seeds.
Touch [Next].
Touch [Set], and then touch [OK] to display the pattern editing screen.
Touch [Edit], touch
, and then touch 
[Appliqué patch for selected colors].Select the area to be made into an appliqué piece by the thread color, and touch [Next].
For this example, select [RED].
Specify the appliqué outlining, stitch type and stitch settings.
For this example, select
(Outside) and [Zigzag stitch], and then set the stitch width to 3.5 mm.
Touch [Preview] to check the image. Check the image of the appliqué made for the area of the selected thread color. If the settings are finished, touch [Next].
Specify settings for the appliqué steps and for thread colors that are not to be sewn. After checking the settings for thread colors to be sewn and not to be sewn, touch [OK].
After this, cut the [APPLIQUE MATERIAL] with the cutting machine. Select [APPLIQUE MATERIAL], and touch
to specify not to sew.
Touch [Add], and then touch [My Design Center].
