Editing and Embroidering the Stamp

1. Touch , and then change the size of the pattern. Touch [OK].

   For this example, specify 100.9 mm×103.8 mm.

2. Touch (Line Property), and then select the stitch type of lines. Touch [OK].

   For this example, touch to select the triple stitch.

   
   
   

3. Touch , and then touch all lines in the screen to apply the settings to them.

   

4. Touch , and then select to add a square. Touch [OK].

5. Touch , and then change the size of the square. Touch [OK].

   For this example, specify a square of 215.1×215.1 mm.

6. Touch (Line Property), and then select the stitch type. Touch [OK].

   For this example, touch to specify that the pattern is not to be sewn.

7. Touch , and then touch the rectangle to apply the settings to it.

8. Touch (Region Property), and then select the fill type. Touch [OK].

   For this example, touch , then , and then select “030” from the decorative fill patterns.

   
   
   

9. Touch , and then touch the inside of the rectangle to apply the settings to it.

   

10. Touch [Next].

11. Specify detailed settings for the decorative fill pattern.

    For this example, set [Size] to 125%, and set [Thickness] to (Decorative light fill).

    

12. Touch to select the outline of the turtle.

    For this example, touch in order to specify settings for all lines of the turtle shell at the same time.

    

13. Specify detailed settings for the triple stitch.

    For this example, set [Run Pitch] to 3.0 mm.

    

14. Touch [Set], then [OK].

15. Touch [Embroidery].

    
    • To change the displayed thread colors, touch [Edit], then , and then specify the settings.

16. Stack lining fabric, quilt batting and top fabric in that order, and then hoop them in an embroidery frame.

17. Attach the embroidery frame to the embroidery machine, and then embroider the pattern.

    • Built-in character patterns from the cutting machine can be transferred and embroidered in the same way.
    • In order to use multiple pattern pieces from the cutting machine, each part must be sent. For details, refer to Sending Multiple Patterns from the Cutting Machine to the Embroidery Machine.