Search

Site Map

Home > Printer Settings > Change Printer Settings Using the Printer Setting Tool (Windows)

Change Printer Settings Using the Printer Setting Tool (Windows)

  • Make sure the printer driver has been installed correctly and you can print.
  • Connect the Label Printer to a computer with a USB cable. Settings cannot be specified via Bluetooth using this tool.
image
The Printer Setting Tool is installed in addition to the printer driver and other software when using the installer.
  1. Connect the Label Printer you want to configure to the computer.
  2. Start the Printer Setting Tool.

    Click Start>Brother>Printer Setting Tool.

    *Depending on your computer's operating system, the Brother folder may or may not be created.

    The main window appears.

    image
    1. Printer

      Lists the connected Label Printers.

      Make sure the Label Printer you want to configure appears next to Printer.

      If a different Label Printer appears, select the Label Printer you want from the drop-down list.

    2. Communication Settings

      Specifies communication settings.

    3. Device Settings

      Specifies device settings. For example, power settings.

    4. Exit
      Closes the window.

image

Use the Printer Setting Tool to configure the Label Printer only when the Label Printer is idle. The Label Printer may malfunction if you try to configure it while it is processing or printing.

Related Information
Did you find the information you needed?

find moreaccept