Small Margin / 小

Automatically cuts a piece of blank tape before printing the first label and then cuts the tape after each label is printed, leaving a 2 mm margin at both ends of each label.

• When the label length is approximately 23 mm or more

  

  1. Approximately 23 mm
  2. 2 mm
• When the label length is approximately 23 mm or less

  

  1. Approximately 23 mm
  2. 2 mm

Large Margin / 大

Automatically cuts the tape after each label is printed, leaving a margin of 25 mm on each end.

1. Approximately 23 mm
2. 2 mm

Chain / 省帶

• Automatically cuts a piece of blank tape before printing the first label and then cuts the tape after each label is printed, leaving a 2 mm margin at both ends of each label.
• When the last label is printed, the tape is neither fed nor cut. Press and simultaneously to feed and cut the tape.

1. Approximately 23 mm
2. 2 mm
3. Cut Position

No Cut / 不裁切

• Select this setting when printing multiple copies of a label, or when using Fabric Iron-On Tapes or other special tapes that cannot be cut by the Tape Cutter of the Label Printer.
• When the last label is printed, the tape is not fed and cut.

  • Press and simultaneously to feed and cut the tape.
  • When using the special tapes that cannot be cut by the Tape Cutter of the Label Printer, remove the Tape Cassette from the Label Printer and use scissors to cut the tape.

1. 23 mm
2. 2 mm

• Select this setting when using special tape.

1. Approximately 23 mm
2. 2 mm